CONSOLIDATED BEARING 6201-Z Single Row Ball Bearings

C0:11.2 kN; d:30 mm; H2:41 mm; Designation of housing:SP206-207/62N-; H:98 mm; Designation of bearing:EX206G2T20; T min.:-20 °C; A:21 mm; d1:44.1 mm; G:R1/8";

e - ISO Factor2:0.74; Da - Cup Frontface Backing Diameter:8.64 in; Design Units:Imperial; Series:HM926700; Cg - Geometry Factor:0.142; Db - Cup Backface Backing Diameter:8.03 in; C - Cup Width:1.5000 in; Cup Part Number:HM926719; D:9.4478 in; Y - ISO Factor3:0.81;

Recommended tightening torque for set screw:3.7 Nm; B:30 mm; T min.:-20 °C; L:80 mm; T max.:100 °C; d:31.75 mm; C:19.5 kN; Z:44.4 mm; C0:11.2 kN; G:M6x1;

Number of Bearings:Double; Housing Material:304 Stainless Steel; Flange Shape:Round Type; Flange O.D. H(φ):81; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Width T(mm):55 ～ 80; Bearing Part Number:6204; Bearing I.D. d(mm):20; Number of Bearings:Double;

Holder Surface Treatment:Black Oxide Coating; Shape:T-Shaped; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Lateral Width L(mm):160; Number of Bearings:Single; Bearing Part Number:6208;

Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6901; Type:Bearings with Housin; Shape:T-Shaped; Number of Bearings:Single; Number of Bearings:Single; Holder Surface Treatment:Electroless Nickel P; Bearing I.D. d(mm):12; Bearing Retained:Yes (with retaining; Width T(mm):12;

Special Configurations Code:No; Symbols of Lubrication Amount:No; Low Torque Specification:No; Low Torque Specification:No; Size Standards:Metric System; Precision Grade Symbol:No; Internal Symbol:No; Holder Color:No; Acoustic Symbol:No; Holder Symbol:W;

RoHS:6; Flange Shape:Square Type; Bearing Part Number:625; Seals:VV (Non-Contact Rubb; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea;

Type:Lock Nuts; Surface Treatment:Surface Treatment Pr; Days to Ship:14 Days; Screw Type:Metric (Fine) Thread; Shape:Square; RoHS:6; Thread Nominal T(inch):3/8-24; Type:Lock Nuts; Shape:Square; Material:[Steel] 1045 Carbon;

Shape:Flange Type; Type:Bearings with Housin; Bearing I.D. d(mm):4; RoHS:6; Bearing Retained:No; Flange Shape:Round Type; Volume Discount:Available; Bearing Part Number:624; Width T(mm):20; Bearing Retained:No;

Housing Style:Four-Bolt Pillow Blo; C - Dynamic Load (Basic):66900 lb; Oil Lubrication - M/N Seal:1400 rpm; Dimension H:1.25 in; e - Geometry Factor:0.22; Dimension F:12.63 in; C0 - Static Load:71900 lb; Eng Internal Radial Clearance - Min:0.0037; Dimension B:7.20 in; Dimension SV:3.33 in;

Seals:DD (Contact Rubber S; Bearing Retained:Yes (with retaining; Width T(mm):10; Shape:T-Shaped; Type:Bearings with Housin; C Chamfered:Not Provided; Days to Ship:8 Days; Lateral Width L(mm):38; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:624;

A:43 mm; d:50.8 mm; H:224 mm; T min.:-20 °C; S:11.8 mm; Designation of closed end cover:SCC211; s1:22.65 mm; T max.:200 °C; N:19mm; Designation of housing:FL211N-;

C:25.7 kN; H:54 mm; N:M12; J:95.3 mm; Designation of housing:SPA209-; T min.:-20 °C; C0:20.8 kN; Weight:2.29 kg; H1:13 mm; B:49.2 mm;

Recommended tightening torque for set screw:33 Nm; Weight:7.3 kg; G:M10x1; S:34.2 mm; SW:6 mm; T min.:-40 °C; s1:64.35 mm; d1:102 mm; d:70 mm; B:68.3 mm;